LATITUDE C400 MODEM DRIVER DOWNLOAD
Only a certified service technician should perform repairs on your computer. Disconnect the LED and palm-rest flex cables. Battery Latch Battery Latch: The reserve battery is attached to the system board with a piece of adhesive tape. Dell Latitude C Service Manual 1 back 2 right 3 front 4 left Screw Identification When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. Disconnect the computer and any attached devices from electrical outlets, and remove the battery.
|Date Added:||19 January 2007|
|File Size:||49.66 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Display Assembly and Display Latch: Dell Latitude C Service Manual 2.
Dell PCTEL Latitude Inspiron 0e 56k Internal Notebook Fax Modem E | eBay
Then replace the memory module. Battery Latch Battery Latch: Disconnect the cooling fan from the movem extender cable. When reinstalling a screw, you must use a screw of the correct diameter and length.
System Board Before You Begin: Don’t have an account?
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Disconnect the computer and any attached devices from electrical outlets, and remove the battery.
Dell 0E828 Inspiron 5100 Latitude C400 C640 Internal 56K Modem Card | 00E828
Make sure that the AC adapter is plugged in and that the main battery is installed properly. System Board Removal System Board: Do not pull on the keyboard flex latitudr.
Remove the two guide pins from the IDE connector. Screw Identification Before You Begin: Pull the audio board up out of its connector. Unless otherwise noted, each procedure in this manual assumes that a part can be replaced by performing the removal procedure latifude reverse order.
Dell Latitude C Service Manual System Board Removal 1 fan 2 reserve battery cable 3 connector for fan extender cable 4 hard-drive connector 5 M2 x 4-mm screw 1 6 memory module socket 7 guide pins 2.
Use your fingertips to carefully spread apart the moodem tabs on each end of the memory module socket.
Palm Rest Palm Rest: Pry the reserve battery free from the system board. Disconnect the computer and any attached devices from electrical outlets, and remove the battery.
Dell 0E Inspiron Latitude C C Internal 56K Modem Card | 00E | eBay
Page 41 Cooling Fan: Make sure that the screw is properly aligned with its corresponding hole, and avoid overtightening. To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. Removing the Memory Modules. Dell Latitude C Service Manual 1 reserve battery connector on system board 2 reserve c4000 cable 3 reserve battery 5.
Dell Latitude C400 Service Manual
Page 32 Display Assembly and Display Latch: Page 28 Wireless Network Adapter: Use a small flat-blade screwdriver to carefully pry around the perimeter of the bezel until the bezel separates from lafitude display assembly.
Page 29 Wireless Network Adapter: Ensure that all five securing tabs are engaged in their respective slots before trying to completely seat the keyboard. Remove the four M2. Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. Disconnect all other external cables from the computer, including the IDE modular bay cable if connected.